Analysis of common pin sticking problems of Pogo Pin Spring-loaded Coector

In the use of Pogo Pin, some customers will encounter unsmooth compression of the Pogo Pin or Pin sticking. The above problems shown as unsmooth preloading and the needle can not work normally.

The reasons can be analyzed from the following 6 aspects:

1. The structural design of tube and plunger;

2. The glue or glue residue blocking the nozzle, resulting in the needle shaft can not be pressed normally;

3. Poor surface electroplating process causes excessive roughness of the ier tube;...

Analysis of common pin sticking problems of Pogo Pin Spring-loaded Coector